Effect of temperature and sulfuric acid on improvement seed germination of three populations of medicinal plant Allium (Allium hirtifolium) and evaluation of micromorphology characteristics using scanning electron microscopy (SEM)
Articles in Press, Accepted Manuscript, Available Online from 02 March 2024
https://doi.org/10.22067/jhs.2024.84817.1295
Hoda Sajedimehr, Mahya Sajedimehr, Majid Azizi
Abstract Introduction
Medicinal plants with a high level of antioxidant activity are of great importance due to their effect on a wide range of diseases such as diabetes, inflammatory diseases, Parkinson's, Alzheimer's, cardiovascular diseases, blood pressure and other diseases caused by oxidative stress. Therefore, studying medicinal plants and extracting and identifying chemical properties and effective compounds in medicinal plants emphasizes the necessity of learning and using medicinal plants. Iranian shallot plant with the scientific name Allium hirtifolium is a species of the onion family (Alliaceae) and is one of the largest genera of the monocot group. Shallot plant is an important horticultural product that has been known and used as a vegetable, spice and medicinal plant since ancient times due to its useful properties. In this genus, there are economically important species such as: onions, garlic, shallots, chives and leeks. Germination and sprouting are one of the most important phenological stages (life cycle) of the plant. Having enough information about the phenological cycle of the plant leads to better management of the different stages of this cycle, which determines the degree of success of agricultural systems. Seedling germination and growth in the early stages are strongly influenced and controlled by environmental factors, especially temperature, soil moisture and seed quality (germination and seedling strength) and internal factors (growth regulators) such as Gibberellin and Abscisic acid hormones.
In order to speed up the germination of seeds and eliminate seed dormancy so that germination can happen faster, there are different methods. One of these methods is mechanical or chemical scratching. The aim of this research is to present a precise and scientific description for the failure of Iranian shallot medicinal plant seed dormancy (Allium hirtifolium) and improvement in the acceleration of germination, considering the different characteristics in three populations of Iranian shallot seeds. Also, to increase the quality and accuracy in this research, a scanning electron microscope was also used to accurately determine the surface changes of the seeds before the acid-washing treatment with sulfuric acid and after the acid-washing treatment with sulfuric acid. In the previous research that has been carried out on Iranian shallot seeds, the simultaneous examination of different temperatures and different times of acid washing by sulfuric acid in a precise manner and with several populations that have different genotypes, as well as the use of Scanning Electron Microscopy (SEM) has not been done.
Materials and methods
The study was done to investigate the effect of different degrees of temperature, and different times of sulfuric acid for acid washing on the improvement of germination of three populations of Iranian shallot seeds (Allium hirtifolium). The effect of four different temperatures (5, 10, 15 and 20 degrees Celsius) inside the Germinator device and four different times of acid washing with sulfuric acid (0, 5, 10, 15 minutes) on germination and micromorphological characteristics of three populations of shallot plant (Feridon Shahr, Tiran and Khansar) was investigated. On the other hand, a scanning electron microscope (SEM) with different degrees of magnification was used for the effect of sulfuric acid treatment on the surface of the seed coat. The experiment was conducted as a factorial, in the form of a completely randomized design with four replications. At the end of the experiment, traits such as germination percentage, average germination time, germination speed, root length and shoot length were evaluated. Also, traits such as diameter, length, volume and weight of seeds in three populations of shallot were also analyzed statistically.
Conclusion and discussion
The results of electron microscopy showed that in all three populations of Iranian shallot seeds, the seed coat, after using the acid washing treatment with sulfuric acid for 15 minutes, underwent noticeable and significant changes compared to the control seeds. The surface of the seed is destroyed by sulfuric acid and the surface of the seed does not have its natural ornamentation and protrusions compared to the control. Also, the effect of temperature, duration of acid washing and seed population on germination percentage, germination speed, average germination duration, seedling root length and seedling length was significant at the 1% probability level (p≤0.01). The population of Fereydoun Shahr has the highest germination percentage (69.16 percent), germination speed 3.7 (number of seeds per day) and average duration of germination 9.64 (number of seeds per day) at a temperature of 5 degrees Celsius and acid washing time of 15 minutes. The maximum shoot length and root length were 19.7 and 8.81 (mm) in the Tiran population with a temperature of 20 degrees Celsius and a 15-minute acid washing time, and in the Khansar population with a temperature of 20 degrees Celsius and time of 5 minutes acid washing respectively. The results show that, according to the dormancy of the seeds and their need for cold, the best temperature for shallot seed germination is 5 degrees Celsius with 15 minutes of acid washing by sulfuric acid. Diversity in shallot plant populations has a significant effect on the performance of this plant in improving seed germination.
Acknowledge
We thank Ferdowsi University of Mashhad and the Isfahan University of Technology.
Keywords: shallot diversity (seed morphology), stratification, seed scarification, germination, scanning electron microscope (SEM)
Effect of deficit irrigation on some morphological and phytochemical characteristics of Anise hyssop (Agastache foeniculum L.)
Articles in Press, Accepted Manuscript, Available Online from 22 August 2026
https://doi.org/10.22067/jhs.2026.99351.1522
Heidar Mohammadi, Abbas Hassani, Fatemeh Sefidkon, Mohammad ّFattahi, Amir Rahimi, Zahra Azimzadeh
Abstract Introduction
Anise hyssop (Agastache foeniculum L.) is a medicinal and perennial herb plant belonging to the Lamiaceae family. Anise hyssop essential oil has antioxidant, anti-inflammatory, antifungal and antibacterial properties and is used in pharmaceutical and food industries. Drought is a major environmental challenge that seriously affects the productivity of medicinal and aromatic plants. Given the severe limitations of water resources in Iran, increasing productivity and optimizing water consumption in the agricultural sector are of great importance. Accordingly, this study investigated the effects of deficit irrigation on the morphophysiological and phytochemical characteristics of the Anise hyssop, aiming to achieve an optimal balance between crop yield, and water conservation.
Materials and Methods
This study was conducted at the Research Farm of Urmia University using a randomized complete block design with four replications. To prepare the land, plots measuring 2 × 2 m were established, with 1.5 m spacing between plots and 3 m between blocks. Seedlings produced in the greenhouse were transplanted to the field in early June and planted in rows spaced 30 cm apart, with 25 cm between plants within each row. Deficit irrigation treatments were applied by omitting one irrigation event at different growth stages as follows: (1) full irrigation during the growth period (control); (2) irrigation cut-off at complete plant establishment stage (20 leaves); (3) irrigation cut-off at inflorescence emergence stage; (4) irrigation cut-off at flowering stage; and (5) irrigation cut-off at both the establishment and inflorescence emergence stages. Plants were sampled at the full flowering stage to measure growth parameters (plant height, stem diameter, leaf number, number of lateral branches, total length of lateral branches, inflorscence length, fresh and dry weight of leaves and stems, fresh and dry herb yield) chlorophyll index (SPAD), total phenol and flavonoid contents, antioxidant capacity, essential oil content and yield, essential oil composition, and leaf nutrient (nitrogen, potassium and phosphorus) concentration. Essential oil was extracted from shade-dried samples by hydrodistillation using a Clevenger apparatus. Essential oil analysis was performed using gas chromatography (GC) and gas chromatography coupled with mass spectrometry (GC/MS).
Results and Discussion
The results showed that the deficit irrigation treatments significantly reduced inflorescence length, fresh and dry weight of leaves and stems, fresh and dry herb yield, chlorophyll and leaf nitrogen content. The highest fresh and dry herb yield (6322.1 and 2054.1 kg ha-1, respectively) and lowest (3039.5 and 973.4 kg ha-1, respectively) were obtained in the control (full irrigation) and irrigation cut-off at both the establishment and inflorescence emergence stages, respectively. The reduction in plant growth indices and yield can be attributed to factors such as decreased cell turgor, impaired cell division and growth, reduced photosynthesis due to stomatal closure, degradation of leaf pigments, hormonal imbalance, and cellular damage resulting from oxidative stress. Total phenolic content, antioxidant activity, and essential oil content increased significantly in response to the deficit irrigation treatments. The highest (7.57 mg GAE g-1 DW) and lowest (6.4 mg GAE g-1 DW) total phenolic content were obtained in the irrigation cut-off at both the establishment and inflorescence emergence stages and full irrigation, respectively. There were no significant differences between the treatments in terms of plant height, stem diameter, leaf number, total flavonoid content, and leaf potassium and phosphorus concentrations. Although irrigation cut-off at different growth stages reduced the essential oil yield, the differences between the full irrigation treatment (47.06 L ha⁻¹) and the irrigation cut-off treatments at the plant establishment stage (38.91 L ha⁻¹) and the flowering stage (40.73 L ha⁻¹) were not significant. According to the results of essential oil analysis, seven different compounds including sabinene, β-pinene, limonene, linalool, methyl chavicol, E-caryophyllene, and germacrene D were identified in the essential oil. Methyl chavicol (92.46-95.02%) and limonene (3.34-5.69%) were identified as the main components of the essential oil, and their concentrations did not change significantly under different levels of deficit irrigation.
Conclusion
In conclusion, although irrigation cut-off caused a decrease in essential oil yield, this reduction was not significant during the plant establishment and flowering stages. Therefore, irrigation cut-off at these stages, particularly during the flowering stage, which coincides with summer water scarcity can be considered as a beneficial strategy for water management and conservation. Additionally, due to the lower growth of plants under water deficit conditions, increasing plant density can be recommended to compensate for the decrease in essential oil yield under water shortage conditions.
Investigating Changes in Morphological Traits and Essential Oil Components in Different Populations of Salvia nemorosa L. in Hamedan Province
Articles in Press, Accepted Manuscript, Available Online from 21 September 2026
https://doi.org/10.22067/jhs.2026.99510.1526
Mahtab Salehi
Abstract Background and Objectives: Salvia nemorosa L. belongs to the family Lamiaceae. The genus Salvia has more than 900 species and is distributed in different parts of the world. In Iran, there are 58 species of annual and perennial herbaceous plants, of which 17 species are endemic. The common persian name of Salvia is “Maryam-Goli” and is mainly used as a flavoring agent, perfume additive and condiment. The genus Salvia has been of special interest in the collection of medicinal plants since ancient times, and today the essential oil of its various species has important applications in the pharmaceutical, perfumery, health and cosmetic industries, as well as a flavoring in the food and beverage industries. Different species of Salvia have various applications in the pharmaceutical and therapeutic industries due to their antiseptic, antibacterial, antifungal, antitumor, antioxidant, and anti-inflammatory properties, and are used in traditional medicine to treat colds, sore throats, bronchitis, digestive disorders, eczema, and tuberculosis.
Materials and Methods: This study was conducted to evaluate the diversity of morphological traits and essential oil compositions of eleven populations of Salvia nemorosa L. in different regions of Hamedan province in June 2025. Plant samples were collected at the flowering stage and after measuring some morphological traits, they were dried in the shade. The measured traits were: plant height, stem diameter, number of inflorescence cycles, distance between 2 inflorescence cycles, fresh and dry weight of the plant, fresh and dry weight of the flowering branch, leaf length and width, petal and sepal length, number of flowers in the inflorescence cycle, and inflorescence length. To investigate the constituents of the essential oil, essential oil extraction was performed by water distillation and the essential oil components were identified and quantified using a gas chromatograph (GC) and a gas chromatograph coupled to a mass spectrometer (GC/MS).
Results: 25 compounds were identified in the essential oil and there was a great variation in the amount and components of the essential oil in the studied populations. Caryophyllene oxide, caryophyllene E, Sabinene and Hexenal<(2E)-> were the main components of the essential oil. The highest plant height (82.40 cm), the highest fresh plant weight (33.51 g) and the dry weight (10.95 g) were obtained in the Deh Sorkheh population. The highest number of inflorescence cycles (32.80) and the longest inflorescence (30.80 cm) were observed in the Deh Musa population. The highest fresh and dry weights of flowering heads (3.31 g and 0.94 g, respectively) and the highest number of flowers per inflorescence cycle (8 flowers) were observed in the Avarzaman population. There was a positive correlation between calcium carbonate and Sabinene. There was a negative correlation between Sabinene and caryophyllene oxide. There was a negative correlation between altitude and fresh and dry weight of the plant and fresh and dry weight of flowering branch. Eleven Salvia nemorosa L. populations were grouped based on morphological traits and essential oil using the "Ward" method. Based on dendrogram analysis of morphological traits, the studied populations were divided into two main groups. The first group was classified into four subgroups including A (Joorab, Tuchaghaz and Saleh Abad populations), B (Dehno Olya population), C (Jowkar, Sheverin and Kasavand populations) and D (Heydareh Bala Shahr population). The second group was also divided into two subgroups including E (Deh Musa and Deh Sorkheh populations) and F (Avarzaman population). Also, based on dendrogram analysis obtained from essential oil cluster analysis, the studied populations were divided into two main groups. The first group was classified into five subgroups including A (Avarzaman, Tuchaghaz, Saleh Abad and Kasavand populations), B (Heydareh Bala Shahr population), C (Joorab and Deh Sorkheh populations), D (Dehno Olya population) and E (Jowkar population). The second group was divided into a subgroup consisting of F (Sheverin and Deh Musa populations). The placement of populations in one group indicates greater uniformity in the populations of that group compared to other populations. On the other hand, the placement of populations in two separate groups could be due to the genetic diversity of the populations and the environmental conditions of their collection sites.
Conclusion: The results of the study showed that environmental factors, like genetic factors, are effective in creating diversity in morphological and phytochemical characteristics, including diversity in the amount and components of essential oils.
The Effect of Auxin and Chitosan Elicitors on Yield and Selected Quantitative and Qualitative Traits of Aloe vera (Aloe barbadensis Miller)
Articles in Press, Accepted Manuscript, Available Online from 21 September 2026
https://doi.org/10.22067/jhs.2026.98408.1508
Mojdeh Farahmand, Hamid Dehghanzadeh, Hossein Zeinali, Shiva Dehghanzadeh
Abstract The Effect of Auxin and Chitosan Elicitors on Yield and Selected Quantitative and Qualitative Traits of Aloe vera (Aloe barbadensis Miller)
Introduction
Aloe vera (Aloe barbadensis Miller) is recognized as one of the most important medicinal plants worldwide due to its extensive therapeutic, cosmetic, and nutritional applications. The global economic importance of this species is substantial, with a high market value for both raw materials and processed products. Therefore, improving both yield and quality-related traits of Aloe vera has become an important research objective.Among the various agronomic strategies, the application of plant growth regulators (PGRs) and biostimulants has emerged as an effective approach to enhance plant growth, physiological performance, and metabolite accumulation. Auxin, as a key plant hormone, regulates cell elongation, division, and differentiation, while chitosan, a natural biopolymer, has been widely investigated for its role in stimulating plant growth and secondary metabolite production. Despite numerous studies on different crops, limited information is available regarding the combined effects of auxin and chitosan on Aloe vera. The present study was conducted to evaluate the influence of auxin and chitosan-based elicitor applications on yield and selected quantitative and qualitative attributes of Aloe vera.
Materials and Methods
A factorial experiment based on a randomized complete block design (RCBD) with four replications was carried out in the greenhouse of the Isfahan Agricultural and Natural Resources Research Center, Iran. Treatments consisted of four concentrations of auxin (NAA)(0, 500, 1000, and 1500 mg L⁻¹) and four concentrations of chitosan (0, 250, 500, and 1000 mg L⁻¹). Uniform clonal plantlets with four leaves and identical genetic backgrounds were transplanted into pots containing an equal mixture of well-decomposed farmyard manure, soil, and sand. After transplanting, pots were uniformly arranged, irrigated twice weekly, and weeded regularly for a 10-month growth period. The first foliar spray was applied at the six-leaf stage and the second at the ten-leaf stage. Two months after the second application, the following parameters were recorded: number of leaves, number of offshoots, leaf diameter, plant height, gel percentage, total yield, gel yield, and photosynthetic pigments (chlorophyll a, b, and carotenoids).
Results and Discussion
The results showed that auxin significantly influenced plant growth, particularly plant height, which increased with auxin concentration up to 1000 mg L⁻¹, likely due to its role in promoting cell elongation and apical dominance. However, further increase in auxin concentration did not significantly enhance plant height, indicating a saturation effect. In contrast, leaf number decreased with increasing auxin concentration, suggesting a shift in assimilate allocation toward vertical growth rather than leaf proliferation. Neither auxin nor chitosan significantly affected the number of suckers, indicating that these treatments had limited influence on vegetative propagation under the experimental conditions.
A significant interaction between auxin and chitosan was observed for leaf weight and thickness, demonstrating a synergistic effect of these treatments on leaf development. The highest leaf weight was obtained with 1000 mg L⁻¹ auxin combined with 500 mg L⁻¹ chitosan, while optimal leaf thickness occurred at moderate auxin levels. This enhancement can be attributed to improved water retention, nutrient uptake, and cell expansion induced by chitosan, along with auxin-mediated growth regulation. However, excessive auxin levels appeared to reduce these traits, supporting previous findings that high auxin concentrations may inhibit cell expansion.
Yield and gel-related traits responded strongly to both treatments and their interaction. The highest gel percentage was achieved at the highest levels of auxin (1500 mg L⁻¹) and chitosan (1000 mg L⁻¹), whereas maximum plant yield and gel yield were obtained with 1000 mg L⁻¹ auxin combined with 500 mg L⁻¹ chitosan. These results suggest that moderate concentrations are more effective for maximizing overall productivity, while higher concentrations may primarily enhance gel concentration rather than total biomass. The observed yield improvement can be explained by enhanced photosynthetic efficiency, delayed leaf senescence, and improved assimilate translocation induced by auxin and chitosan.
Biochemical analyses further supported these findings. Chlorophyll a and b contents increased with auxin application up to 1000 mg L⁻¹, followed by a decline at higher concentrations, indicating that optimal auxin levels promote pigment synthesis while excessive levels may disrupt metabolic balance. Chitosan significantly increased chlorophyll content across all concentrations, likely due to its role in enhancing nutrient uptake and photosynthetic activity. Carotenoid content was primarily affected by chitosan and increased with its concentration, suggesting improved antioxidant capacity and stress tolerance.
Gel carbohydrate content was significantly enhanced by both auxin and chitosan, with higher concentrations leading to substantial increases compared to the control. This increase may be attributed to the role of auxin in regulating carbohydrate metabolism and the ability of chitosan to enhance photosynthesis and carbon–nitrogen balance. The combined application of these treatments likely improved enzymatic activity involved in sugar synthesis and accumulation.
Conclusion
Overall, the combined application of auxin and chitosan elicitors significantly improved the growth performance, yield, and biochemical traits of Aloe vera. Co-application of these regulators had more pronounced effects compared to their individual use. Therefore, a combined treatment of 1500 mg L⁻¹ auxin and 1000 mg L⁻¹ chitosan is recommended to maximize gel percentage, whereas the combination of 1000 mg L⁻¹ auxin and 500 mg L⁻¹ chitosan is optimal for achieving higher leaf and gel yields.
Evaluation of Biochemical Diversity and Antioxidant Activity of Anisosciadium orientale Populations DC. in Fars Province
Articles in Press, Accepted Manuscript, Available Online from 04 October 2026
https://doi.org/10.22067/jhs.2026.99587.1527
Saeideh Mohtashami, Askar Ghani
Abstract Extended Abstract
Evaluation of Biochemical Diversity and Antioxidant Activity of Anisosciadium orientale DC. Populations in Fars Province
Introduction
Anisosciadium orientale is a native medicinal and aromatic plant of Iran belonging to the Apiaceae family and is naturally distributed in southern regions of the country. The plant is locally known as Khalilou, Khalilouk, and Jalilou and has long been used in traditional medicine and local cuisine. Different parts of the plant are consumed as fresh vegetables, spices, pickles, and traditional foods. Ethnobotanical reports indicate its application in alleviating toothache, treating diarrhea, and controlling epilepsy. Previous phytochemical investigations have revealed the presence of valuable bioactive compounds and demonstrated antioxidant and antimicrobial properties of this species. The quantity and quality of secondary metabolites in medicinal plants are influenced by both genetic and environmental factors. Variations in ecological conditions such as altitude, temperature, precipitation, soil characteristics, and solar radiation may significantly affect the biosynthesis of phenolic compounds and other phytochemicals. Therefore, evaluating biochemical diversity among natural populations is an important step toward identifying superior germplasm for domestication, breeding programs, and sustainable utilization of medicinal plants. Despite its medicinal and nutritional importance, information regarding biochemical variation among natural populations of A. orientale remains very limited. Therefore, the present study was conducted to investigate biochemical traits and antioxidant activity among seven natural populations of A. orientale collected from different regions of Fars Province.
Materials and Methods
Seven wild populations of A. orientale were collected from different regions of Fars Province, including Khafr, Jahrom, Gorm mount, Zarrindasht, Khonj, Darab, and Fasa during the early flowering stage in April 2024. The aerial parts of plant materials were dried under shade at laboratory temperature and used for biochemical analyses. A completely randomized design with three replications (about 50 plants) was employed. Total phenolic content, total flavonoids, flavones and flavonols, the ratio of flavones and flavonols to total flavonoids, tannins, total soluble carbohydrates, antioxidant activity and biomass were evaluated. Extraction was performed using ethanol solvent and a Soxhlet apparatus. Total phenolic content was determined using the Folin–Ciocalteu reagent. Total flavonoids, flavones and flavonols, tannins, and total soluble carbohydrates were quantified spectrophotometrically following standard analytical procedures. Antioxidant activity was assessed using the DPPH radical scavenging assay. Statistical analyses were performed using analysis of variance (ANOVA), and mean comparisons were conducted using Tukey’s test at the 5% probability level. Hierarchical cluster analysis was performed in Minitab v.16 using Euclidean distance and average linkage to assess the similarity among Anisosciadium populations based on biochemical traits.
Results and Discussion
Significant differences were observed among populations for all evaluated biochemical traits (P ≤ 0.01), indicating substantial biochemical diversity within the species. The highest total phenolic content was recorded in the Jahrom population (15.02 mg GAE g⁻¹ DW), whereas the lowest value was observed in Zarrindasht (7.68 mg GAE g⁻¹ DW). Similar trends were observed for total flavonoids and flavones/flavonols, with Jahrom exhibiting the highest concentrations. These findings suggest enhanced activity of the phenylpropanoid biosynthetic pathway in this population. Phenolic compounds and flavonoids play important roles in plant defense mechanisms against oxidative stress and environmental challenges (Sharma et al., 2019; Zagoskina et al., 2023). The Fasa population exhibited the highest tannin content (5.96 mg catechin equivalent g⁻¹ DW). Elevated tannin accumulation may be associated with environmental adaptation and ecological conditions of the habitat, particularly altitude-related stresses. Tannins contribute significantly to plant defense against herbivores, pathogens, and abiotic stress factors (Iqbal & Poór, 2025). The highest soluble carbohydrate content was observed in the Kouh-Gorm population (100.40 mg glucose equivalent g⁻¹ DW), while the lowest amount was recorded in Zarrindasht (30.03 mg glucose equivalent g⁻¹ DW). Soluble carbohydrates are known to participate in osmotic adjustment and stress tolerance mechanisms under adverse environmental conditions (Blum, 2017; Rosa et al., 2009; Sami et al., 2016). Interestingly, the highest antioxidant activity was found in the Zarrindasht population (94.43%), despite its relatively low phenolic and flavonoid contents. This observation suggests that compounds other than phenolics, such as terpenoids, vitamins, and other antioxidant metabolites, may substantially contribute to the antioxidant capacity of this population. Previous studies have similarly reported that antioxidant activity is not always directly correlated with total phenolic concentration (Shahidi & Ambigaipalan, 2015; Apak et al., 2016). Overall, the observed biochemical variability among populations can be attributed to the combined effects of genetic background and environmental conditions. Such diversity represents a valuable resource for selecting superior populations with desirable phytochemical characteristics. Biomass varied significantly among populations (p ≤ 0.01), ranging from 0.48 to 3.57 g dry weight plant⁻¹, with the highest value recorded in Kuh-Garm and the lowest in Khafr. The approximately 4.7-fold difference suggests substantial population-level variation in biomass production, likely reflecting the combined effects of population characteristics and site-specific environmental conditions rather than a single climatic factor.
Conclusion
The present study demonstrated considerable biochemical diversity among natural populations of Anisosciadium orientale in Fars Province. The Jahrom population showed superior performance regarding phenolic compounds and flavonoids, whereas Fasa exhibited the highest tannin content and Gorm mount accumulated the greatest amount of soluble carbohydrates. In contrast, the Zarrindasht population displayed the strongest antioxidant activity. These findings highlight the existence of valuable biochemical variation within natural populations of A. orientale and emphasize the potential of selected populations for future breeding programs, domestication efforts, conservation strategies, and the commercial production of bioactive compounds.
Improving drought stress tolerance of bell pepper (apsicum annuum L.) through foliar application of melatonin and silicon
Articles in Press, Accepted Manuscript, Available Online from 07 October 2026
https://doi.org/10.22067/jhs.2026.99110.1520
Vahid Akbarpour, Farzaneh Nourbakhsh, Kambiz Mashaiekhi, Seyyed Javad Mousavizadeh, Mohammad Ali Bahmaniar
Abstract Introduction
Bell pepper (Capsicum annuum L.) is one of the most important and widely consumed vegetables in the human diet. Due to its specific physiological characteristics, it is very sensitive to drought stress and water deficit conditions. In recent years, the use of biological compounds as natural elicitors to increase plant resistance to abiotic stresses has received attention. This study aimed to investigate the effect of foliar spraying of melatonin and silicon on physiological and defense indices of bell pepper under drought stress.
Materials and Methods
The experiment was conducted as a split factorial experiment in a completely randomized design with drought as the main factor at three levels (90, 70, and 50 percent of field capacity), the first subfactor, melatonin at three levels (0, 100, and 200 µM), and the second subfactor, silicon at three levels (0, 100, and 200 mg/L) in the greenhouse of Sari Agricultural Sciences and Natural Resources University. The studied traits included antioxidant enzyme activity (catalase, peroxidase, superoxide dismutase), proline, malondialdehyde (MDA) and soluble leaf carbohydrates.
Results and Discussion
The results of analysis of variance showed that the interaction effects of treatments on the levels of catalase and peroxidase enzymes, leaf soluble carbohydrates, proline, and malondialdehyde were significant at the 1% probability level. The highest activity of catalase and peroxidase enzymes was obtained under non-stress conditions and foliar application of 100 μM melatonin and 100 mg/L silicon. Also, the highest proline accumulation was observed at the highest stress level along with foliar application of 200 μM melatonin. Foliar application of silicon at levels of 100 and 200 mg/L and 200 μM melatonin significantly reduced the amount of MDA in stressed plants. The highest amount of leaf soluble carbohydrates was observed in the moderate stress treatment and 100 mg/L silicon foliar application.
Conclusion
These results indicate that simultaneous application of melatonin and silicon effectively improves the tolerance of bell pepper to drought stress by strengthening the antioxidant defense system, increasing the accumulation of osmolytes, and reducing oxidative damage. Therefore, the combined use of these two compounds can be proposed as a biological and low-risk solution for managing drought stress in the sustainable production of this plant.
Introduction
Bell pepper (Capsicum annuum L.) is one of the most important and widely consumed vegetables in the human diet. Due to its specific physiological characteristics, it is very sensitive to drought stress and water deficit conditions. In recent years, the use of biological compounds as natural elicitors to increase plant resistance to abiotic stresses has received attention. This study aimed to investigate the effect of foliar spraying of melatonin and silicon on physiological and defense indices of bell pepper under drought stress.
Materials and Methods
The experiment was conducted as a split factorial experiment in a completely randomized design with drought as the main factor at three levels (90, 70, and 50 percent of field capacity), the first subfactor, melatonin at three levels (0, 100, and 200 µM), and the second subfactor, silicon at three levels (0, 100, and 200 mg/L) in the greenhouse of Sari Agricultural Sciences and Natural Resources University. The studied traits included antioxidant enzyme activity (catalase, peroxidase, superoxide dismutase), proline, malondialdehyde (MDA) and soluble leaf carbohydrates.
Results and Discussion
The results of analysis of variance showed that the interaction effects of treatments on the levels of catalase and peroxidase enzymes, leaf soluble carbohydrates, proline, and malondialdehyde were significant at the 1% probability level. The highest activity of catalase and peroxidase enzymes was obtained under non-stress conditions and foliar application of 100 μM melatonin and 100 mg/L silicon. Also, the highest proline accumulation was observed at the highest stress level along with foliar application of 200 μM melatonin. Foliar application of silicon at levels of 100 and 200 mg/L and 200 μM melatonin significantly reduced the amount of MDA in stressed plants. The highest amount of leaf soluble carbohydrates was observed in the moderate stress treatment and 100 mg/L silicon foliar application.
Conclusion
These results indicate that simultaneous application of melatonin and silicon effectively improves the tolerance of bell pepper to drought stress by strengthening the antioxidant defense system, increasing the accumulation of osmolytes, and reducing oxidative damage. Therefore, the combined use of these two compounds can be proposed as a biological and low-risk solution for managing drought stress in the sustainable production of this plant.
Effects of Different Planting Dates on Yield, Growth Characteristics, and Biochemical Composition of Roselle (Hibiscus sabdariffa L.) under the Climatic Conditions of Khuzestan, Iran
Articles in Press, Accepted Manuscript, Available Online from 26 October 2026
https://doi.org/10.22067/jhs.2026.100734.1537
Masoumeh Hashempoor, Maryam Zolfaghari
Abstract Introduction:
Roselle (Hibiscus sabdariffa L.) is an important medicinal and industrial crop widely cultivated in tropical and subtropical regions due to its high nutritional value and rich content of bioactive compounds. The calyces of this plant are extensively used in the food, pharmaceutical, and healthcare industries as natural sources of antioxidants, organic acids, anthocyanins, and phenolic compounds. These secondary metabolites play a key role in determining the nutritional, medicinal, and commercial quality of roselle products. Among agronomic practices, planting date is considered a critical management factor that strongly influences plant growth, yield formation, and secondary metabolite accumulation by determining the environmental conditions experienced during key phenological stages. Synchronizing plant development with favorable temperature and radiation regimes can enhance both quantitative and qualitative traits. In warm and semi-arid regions such as Khuzestan province, inappropriate planting dates may expose plants to excessive heat stress during flowering and calyx development, thereby reducing yield and quality. Despite the increasing interest in Roselle cultivation in Iran, information regarding optimal planting dates under local climatic conditions remains limited. Therefore, this study aimed to evaluate the response of quantitative, qualitative, and biochemical traits of Roselle to different planting dates in the warm and semi-arid climate of Hamidieh County, Khuzestan, Iran.
Materials and Methods:
A field experiment was carried out during the 2023–2024 growing seasons at a research farm located in Hamidieh County, Khuzestan province, Iran. The experiment was arranged as a randomized complete block design with four planting date treatments and five replications. The planting dates included April 14, May 5, May 22, and June 5, which were selected based on common regional cultivation practices to represent early to late planting conditions. Standard agronomic management practices were applied uniformly across all treatments throughout the growing period on the farm. Quantitative traits measured at harvest included plant height, number of lateral branches per plant, number of calyces, and fresh and dry weight of calyces, which collectively reflect vegetative growth, reproductive performance, and yield potential. In addition, several biochemical traits were assessed using standard laboratory methods to evaluate the quality of the harvested calyces. These traits included total phenolic content, total flavonoids, total carbohydrates, ascorbic acid, antioxidant capacity, and anthocyanin content, representing the major bioactive compounds contributing to the nutritional and medicinal value of Roselle.
Results and Discussion:
The results indicated that planting date significantly affected most quantitative and biochemical traits of roselle (Hibiscus sabdariffa L.). The earliest planting date (April 14) resulted in the highest plant height (217 cm), number of lateral branches (18 per plant), number of calyces (215 per plant), calyx fresh weight (2.37 g), calyx dry weight (0.44 g), and calyx yield (1,130 kg ha⁻¹). In contrast, the latest planting date (June 5) resulted in the lowest plant height (78 cm), number of lateral branches (2 per plant), calyx fresh weight (1.37 g), calyx dry weight (0.25 g), and calyx yield (181 kg ha⁻¹). The lowest mean number of calyces (40 per plant) was also recorded on June 5, although it did not differ significantly from the May 5 and May 22 treatments. Calyx dry weight on May 22 (0.42 g) was statistically comparable to that on April 14. Regarding biochemical traits, the highest total phenolic content (33.30 mg g⁻¹) was recorded on May 5, whereas the lowest (24.24 mg g⁻¹) occurred on April 14. Total flavonoid content ranged from 10.51 mg g⁻¹ on June 5 to 12.78 mg g⁻¹ on May 5. Anthocyanin content was highest on April 14 (18.47 mg g⁻¹) and lowest on June 5 (14.83 mg g⁻¹). Antioxidant capacity showed its highest mean value (19%) on June 5 and its lowest value (7%) on May 5. Total soluble carbohydrate content was highest on June 5 (33.06) and lowest on May 5 (18.55), while ascorbic acid content was highest on May 22 (59.45 mg g⁻¹) and lowest on June 5 (37.43 mg g⁻¹). Overall, early planting favored vegetative growth and calyx yield, whereas planting date influenced biochemical composition differently, indicating that the optimal planting date may depend on whether yield or specific quality attributes are prioritized.
Conclusion:
Overall, the findings of this study demonstrate that planting date plays an important role in determining the growth, calyx yield, and biochemical composition of roselle (Hibiscus sabdariffa L.) under the warm, semi-arid conditions of Hamidieh, Khuzestan, Iran. Early planting on April 14 was the most favorable treatment for vegetative growth and calyx production, resulting in the highest plant height, number of lateral branches, number of calyces, calyx fresh and dry weights, and calyx yield. However, the effects of planting date on biochemical traits varied depending on the compound measured. While anthocyanin content was highest in the earliest planting treatment, the highest total phenolic and flavonoid contents were recorded on May 5, and the highest ascorbic acid content was observed on May 22. The highest mean antioxidant capacity and total soluble carbohydrate content were recorded in the latest planting treatment, although the statistical significance of these differences should be considered when interpreting the results. These findings indicate that the planting date that maximizes calyx yield may not necessarily optimize all biochemical quality attributes. Therefore, April 14 can be recommended as a promising planting date when the primary objective is to maximize calyx production under the conditions of this study. Further research evaluating planting date, phenological development, and environmental conditions across multiple locations and growing seasons is needed to confirm this recommendation and identify suitable planting dates for specific yield and quality objectives.
Effect of population, explant, 2,4-D, and kinetin on callus induction in native populations of Iranian black cumin (Nigella sativa L.)
Articles in Press, Accepted Manuscript, Available Online from 17 November 2026
https://doi.org/10.22067/jhs.2026.101486.1546
Shiva Mihammad khani, Masoud Dehdari, Hamid Dehghanzadeh
Abstract Introduction
Black seed (Nigella sativa L.) is a valuable medicinal plant from the Ranunculaceae family, widely used in traditional medicine and the pharmaceutical industry due to its thymoquinone and other secondary metabolites. Conventional propagation through seeds is limited by high variability and low uniformity. Tissue culture, particularly callus induction, provides an efficient approach for mass propagation, germplasm conservation, and production or investigation of secondary metabolites. Callus induction is affected by several interacting factors, including explant type, population background, physiological condition of the tissue, and the type and concentration of plant growth regulators. In particular, the balance between auxins and cytokinins can determine cellular dedifferentiation, cell division, and subsequent callus development. However, comparative information on callus induction responses of different native Iranian populations of black seed using different explants and combinations of kinetin and 2,4-D remains limited. Therefore, this study aimed to investigate population- and explant-dependent responses to different concentrations of kinetin and 2,4-D in six native populations of Iranian black seed and to identify responsive population–explant–hormone combinations for callus induction.
Materials and Methods
The experiment was conducted as a factorial experiment in a completely randomized design with three replications. The experimental factors included six populations (Isfahan, Shahrekord, Shahreza, Semirom, Shiraz, and Mashhad), four explant types (hypocotyl, leaf, root, and epicotyl), four kinetin concentrations (0, 1, 1.5, and 2 mg/L), and three 2,4-D concentrations (0, 1, and 2 mg/L). Seeds were surface-sterilized with 1% sodium hypochlorite and initially cultured on hormone-free Murashige and Skoog (MS) medium. After three weeks, the explants were transferred to MS media containing the experimental hormone treatments. Following 21 days of culture, callus traits including length, width, fresh weight, dry weight, and callus induction percentage were evaluated. Analysis of variance was performed using SAS software version 9.4, and treatment means were compared using the LSD test at the 5% probability level. Partial eta-squared (η²p) was calculated to estimate the effect size of the experimental factors and their interactions.
Results and Discussion
Analysis of variance showed that the effects of population, kinetin, 2,4-D, and the triple interaction of population × kinetin × 2,4-D on callus traits, depending on explant type, were significant (P ≤ 0.05 or P ≤ 0.01). The significance of the triple interaction in all explant types demonstrated that callus response to plant growth regulators depended on the population and explant context and therefore could not be interpreted independently. In the hypocotyl explant, the maximum length (9.37 mm), width (8.10 mm), fresh weight (249.00 mg), and dry weight (12.00 mg), together with 100% callus induction, were observed in the Shahreza population with 1 mg/L kinetin + 1 mg/L 2,4-D. In the leaf explant, the maximum length (9.80 mm), fresh weight (225.33 mg), and callus induction percentage (100%) were obtained in the Semirom population with 1 mg/L 2,4-D without kinetin. Increasing 2,4-D to 2 mg/L was associated with a marked reduction in response in this explant. In the root explant, the maximum length (9.60 mm), fresh weight (205.33 mg), and callus induction percentage (100%) were obtained in the Shahreza population with 1 mg/L kinetin + 1 mg/L 2,4-D. In the epicotyl explant, the maximum length (10.93 mm), fresh weight (260.67 mg), and callus induction percentage (100%) were observed in the Shahreza population with 2 mg/L kinetin without 2,4-D. The different hormonal combinations associated with the highest responses among explants indicate that no single kinetin–2,4-D combination was universally optimal. The results also suggest that tissue-specific responses should be considered when developing callus induction protocols. The range of η²p values for the triple interaction across traits and explant types was 0.542 to 0.986. These values represent model-specific effect sizes and should not be interpreted as indicators of the intrinsic or absolute importance of the experimental factors. Overall, Shahreza and Semirom showed the highest observed responses under specific experimental conditions; Shahreza was highly responsive in hypocotyl, root, and epicotyl explants, whereas Semirom showed the highest observed response in the leaf explant.
The results demonstrate that callus induction in native Iranian populations of N. sativa is a multifactorial response influenced by population, explant type, and plant growth regulator composition. The significant triple interaction across explants indicates that differences among populations cannot be interpreted without considering the type of tissue and hormonal environment. The contrasting responses observed within the Shahreza population also demonstrate that even a single population may require different hormonal conditions depending on the explant. These findings provide useful starting points for subsequent optimization of callus proliferation and regeneration protocols and for investigating the biotechnological potential of responsive populations. However, the treatments identified in this study represent the highest observed responses among the tested combinations and should not be considered universally optimal protocols. Further studies are required to evaluate callus quality, regeneration capacity, stability of responses, and the production of valuable secondary metabolites such as thymoquinone. In conclusion, a population-oriented and explant-oriented approach is necessary for developing efficient tissue culture protocols for N. sativa.
Assessment of Nutrient Elements, Biochemical Compounds, and Antioxidant Activity of the Medicinal Mushroom Ganoderma lucidum
Volume 40, Issue 3, Summer 2026, Pages 381-367
https://doi.org/10.22067/jhs.2022.77380.1181
J. Zandavifard, M. Azizi, M. Darroudi, A. Hosseini
Abstract Introduction Ganoderma lucidum is a mushroom of high medicinal value that has been widely used in the Far East countries especially in traditional Chinese medicine as promoting human health and treatment of many diseases. Nowadays, many published studies have established that it is a rich source of nutraceutical and pharmaceutical substances with potent and unique properties as immunomodulatory agents, hypercholesterolemic agents, or coadjutant treatments in diseases such as cancer, hypertension, insomnia, anorexia, dizziness, and chronic hepatitis, among others. This species is rich in several bioactive compounds (over 400 compounds) mainly, including polysaccharides, triterpenoids, steroids, fatty acids, amino acids, nucleotides, proteins, and alkaloids. Herein, the fruiting bodies of G. lucidum were studied in terms of nutritional value and chemical composition, and the antioxidant activity of extracts from the fruiting bodies was further assessed. Materials and Methods In order to detect nutrient elements, the samples were digested using a microwave digestion system (Milestone Ethos, Germany) with a maximum power of 1000 W and further characterized using inductively coupled plasma optical emission spectroscopy (ICP-OES). Biochemical molecule contents were characterized using Acquity Ultra-Performance Liquid Chromatograph (UPLC, Waters) coupled to a photodiode array detector (PDA, Waters) and an electrospray ionization quadrupole time-of-flight tandem mass spectrometer (ESI–QTOF/MS; Waters). In order to assess antioxidant activity, two kinds of extract including 80% methanolic extract (ME) and hot water (HWE) were prepared by ultrasonic method. Six different in vitro assays were used to determine antioxidant capacity, including ABTS, DPPH, superoxide (SO), nitric oxide (NO) free radicals scavenging, iron-reducing power (FRAP), and iron chelating activity (ICA). The data were analyzed by one-way analysis of variance (ANOVA) and the means were separated by the Newman-Keuls Multiple Comparison test (GraphPad Prism 8, San Diego, CA, USA). All data were expressed as mean ± standard deviation. P ≤ 0.05 was considered to indicate a statistically significant difference. Furthermore, half-maximal inhibitory concentration (IC50) values for each assay were calculated from linear or logarithmic regression using Excel software. Results and Discussion G. lucidum was characterized in terms of nutritional value and chemical composition. Generally, to study the nutraceutical value of G. lucidum, 14 elements were analyzed by ICP-OES. Among the macronutrients, phosphorus and potassium (2910.8 and 1510.8 mg.kg-1 dry matter, respectively) were the most abundant, followed by iron and zinc (8.5 and 7.74 mg.kg-1 dry matter, respectively) among the micronutrients. In terms of biochemical compounds, a total of 37 compounds were identified, among which ganoderic acid was the most abundant compound (15890.1 ± 232.1 μg per g dry matter) followed by sinapic acid and succinic acid (2011.4 ± 28.11 and 1505.33 ± 31.5 μg per g dry matter, respectively). The results of antioxidant assays clearly revealed that the methanolic extract generally showed higher antioxidant activity than the corresponding hot water extract. In the ABTS assay, ME showed higher activity (IC50, 48.46 ± 2.42 µg.ml-1) than HWE (163.51 ± 4.51 µg.ml-1) with a significant difference (P ≤ 0.05). For DPPH assay, radical scavenging capacity was dose-dependent and IC50 values of ME (111.93 ± 1.39 µg.ml-1) and HWE (213.48 ± 5.42 µg.ml-1) showed a significant difference (P ≤ 0.05). In the FRAP assay, ME showed stronger iron-reducing activity (IC50, 512.64 ± 4.06 µg.ml-1) than HWE (IC50, 898.51 ± 7.8 µg.ml-1) (P ≤ 0.01). In the ICA assay, ME also showed higher activity (IC50, 301.88 ± 7.01µg.ml-1) than HWE (IC50, 545.23 ± 1.21 µg.ml-1) (P ≤ 0.01). In the SO assay, ME (IC50, 488.8 ± 7.38 µg.ml-1) and HWE (IC50, 645.92 ± 5.48 µg.ml-1) showed a significant difference (P ≤ 0.01). In addition, in the NO assay, both extracts showed weak nitric oxide radical scavenging activity; however, ME showed the highest activity (IC50, 1189.5 ± 8.5 µg.ml-1) in comparison to HWE (IC50, 1343.2 ± 10.6 µg.ml-1) but the difference was not statistically significant (P = 0.0901). The results clearly indicate that different extraction solvents used in this study significantly affected antioxidant capacities. Conclusion G. lucidum proved to be an important source of nutrients and antioxidant compounds such as terpenoids, especially triterpenoids, and polysaccharides. The free radical scavenging properties, reducing power and iron-chelating activity of G. lucidum may be mainly associated with phenolic compounds and triterpenoids. Therefore, based on the nutritional and biochemical profile of G. lucidum, and also its antioxidant power, this mushroom possesses high nutritional and antioxidant potential.
Evaluation of Morphophysiological and Biochemical Characteristics of Stevia rebaudiana Bertoni Treated with Proline Nanoparticles and Liquid Fish Waste Fertilizer in Salinity Stress
Volume 40, Issue 3, Summer 2026, Pages 451-433
https://doi.org/10.22067/jhs.2025.94616.1446
Z. Mahdavi, B. Esmailpour, R. Azarmi
Abstract Introduction Stevia rebaudiana Bertoni is plant perennial medicinal of the Asteraceae (Compositae) family. Stevia plants contain many compounds with medicinal properties, importantly steviol glycosides (e.g., stevioside and dulcoside), in the leaves and shoots that are used as natural and useful sweeteners in the food industry. These sweeteners are 30 to 400 times sweeter than glucose and sucrose and calorie-free. Salinity stress causes major constraints factor affects crop production in world. The adverse effects of salinity stress on plant growth can be related to factors e.g. induced osmotic stress and ionic imbalance. Ionic imbalance is due to high presence of sodium and chloride. There are several strategies for reduce salt effects in plants that including have been used biofertilizers, organic fertilizers and nanoparticles. Nanoparticles (NPs) as one of the most important effective methods, to reduce salinity stress condition. Proline (Pro) is one of compatible solutes and cellular protector accumulated in response to abiotic stress. Organic fertilizers reduce reduces the harmful effects of chemical fertilizer and improve the chemical, biological structure of soils, leading to increased crop yield. Fish processing waste is rich in essential proteins, macro and micronutrients that causes reduced salinity stress. Materials and Method Stevia seedlings were purchased from a medicinal plant greenhouse (Zargiah) in Shiraz city and planted in 12 L pots. This study was conducted in a factorial experiment and based on a completely randomized design with four replications in the spring-summer of 2022. Planting bed includes containing a mixture of cocopeat and perlite. The plants were first irrigated with half-strength Hoagland’s solution and then irrigated with full-strength nutrient solution. The first factor was salinity stress at four levels (0, 30, 60, 90 mM NaCl) and the second factor salinity reducer at five levels (control, 15 and 30 mg.L-1 glycine betaine without liquid fish waste fertilizer, 15 and 30 mg.L-1 glycine betaine with 15% (v/v) liquid fish waste fertilizer). Then growth parameters, relative water content, a* and b* color indices and total phenol, hydrogen peroxide (H2O2), malondialdehyde (MDA), proline, and total carbohydrates were measured. Data were analyzed using SAS 9.1 software by analyzing the means using Duncan’s multiple range test, with a significant difference level at p < 0.05. Results and Discussion Salinity stress significantly decreased plant growth traits. Salinity, increased proline and total phenols, MDA, H2O2, EL compared with the control. Fish waste fertilizer with proline nanoparticles increased morphological parameters, RWC, proline, phenols, sugar, and reduced EL, MDA, and H2O2. Salinity stress caused a 39% reduction in plant height, 50.24% in root fresh weight, 70.93% in root dry weight, 46.15% in relative water content, 55.93% in a*color, 51.16% in b*color, 39.44% in proline, 71.68% total carbohydrate, 42.7% by phenol and 73.33% by hydrogen peroxide by compared to the control. The application of 20 mg.L-1 proline nanoparticles simultaneous with liquid fish waste fertilizer resulted in reduction a 31.7% by membrane electrolyte leakage, 56.66% by root sodium, and an increase of 78.23% proline, 72.98% by total carbohydrate, 71.42% root potassium, and 62.45% by root calcium under 90 mM salinity stress compared to the control treatment. Conclusion Results showed that salinity due to accumulation in Na+ and disruption to the absorption of essential nutrients especially N and K, negatively affected plant growth and yield and overall. Proline and fish waste bio-fertilizer with increase in potassium causes open of the stomata, increase of photosynthesis and plant growth. Application of proline especially when used at a concentration of 20 (mg.L-1) and fish waste bio-fertilizer could be considered as a sustainable, for the mitigating of salinity stress effects in stevia plants and potentially other crops.
Investigating the Effects of Different Elicitors on Growth and Phytochemical Characteristics of Sage (Salvia officinalis L.) under Hydroponic Cultivation System
Volume 40, Issue 3, Summer 2026, Pages 465-453
https://doi.org/10.22067/jhs.2025.94738.1449
R. Azadi Gonbad, N. Farhadi
Abstract Introduction Hydroponic systems have emerged as an advanced method for cultivating medicinal plants, offering precise control over environmental and nutritional factors to enhance the production of secondary metabolites. Chemical elicitors, such as salicylic acid (SA) and methyl jasmonate (MeJA), play a key role in stimulating plant defense responses and increasing the synthesis of valuable phytochemical compounds. These compounds alleviate biotic and abiotic stress signals, triggering plant defense mechanisms and stimulating the biosynthesis of valuable secondary metabolites, including phenolics, flavonoids, and essential oils (Mehdizadeh and Moghaddam, 2023). Salvia officinalis L. (sage), a perennial aromatic plant from the Lamiaceae family, is known for its medicinal properties and rich content of bioactive compounds, including essential oils and phenolic derivatives. Recent studies have demonstrated that exogenous application of SA and MeJA can significantly influence plant growth and secondary metabolism. However, their effects are highly concentration-dependent and species-specific, necessitating further research to determine optimal dosages for different medicinal plants (Mohi-Ud-Din et al., 2025). While some studies have explored the individual effects of these elicitors, their synergistic interactions in hydroponically grown sage remain understudied (Jeyasri et al., 2023). This study investigates the synergistic effects of SA and MeJA foliar application on the growth, phytochemical composition, and antioxidant activity of sage in a hydroponic system. Materials and Methods This experiment was conducted as a factorial design based on a completely randomized design with three replications. Treatments included the foliar application of SA (0, 0.5, and 1 mM) and MeJA (0, 0.25, and 0.5 mM). Sage seeds were germinated under controlled conditions, and seedlings were transferred to a hydroponic system with a perlite-cocopeat (3:1, v/v) substrate. Plants were grown under natural light, with temperatures maintained at 20–30°C and relative humidity at 70–80%. Nutrient solutions were provided using Hoagland’s formula (EC 1.6 dS.m-1). Foliar treatments were applied at three growth stages: initial three-leaf, six-leaf, and flowering onset. Ten days after the final treatment, biomass, photosynthetic pigments, antioxidant enzyme activities (POX, APX, SOD), phenylalanine ammonia-lyase (PAL) activity, phenolic and flavonoid content, essential oil percentage, and antioxidant capacity (DPPH assay) were evaluated. Results and Discussion The experimental results demonstrated that the foliar application of salicylic acid and methyl jasmonate significantly influenced the growth, physiological traits, and phytochemical composition of hydroponically cultivated sage. The combined treatment of 0.5 mM SA and 0.25 mM MeJA produced the highest fresh (49.00 g) and dry (21.48 g) biomass, indicating a synergistic effect on plant growth. This enhancement can be attributed to the role of SA in promoting cell division and elongation, while MeJA at low concentrations stimulates metabolic activity without inducing excessive stress. However, higher MeJA concentrations (0.5 mM) exhibited inhibitory effects, likely due to the overactivation of defense mechanisms that divert energy away from growth-related processes. Photosynthetic pigments, including chlorophyll and carotenoids, were significantly influenced by the elicitor treatments. The combination of 1 mM SA and 0.25 mM MeJA resulted in the highest carotenoid content (2.34 mg.g⁻¹ FW), suggesting that moderate elicitation enhances photosynthetic efficiency. Conversely, excessive MeJA (0.5 mM) led to a reduction in chlorophyll content, possibly due to accelerated senescence or oxidative stress. The application of SA and MeJA also induced a marked increase in antioxidant enzyme activities, including POX, SOD, and APX. Among the highest activities, POX was maximized in the combined treatment of 0.5 mM SA and 0.25 mM MeJA (20.49 U.mg⁻¹ protein), while the highest APX (6.96 U.mg⁻¹ protein) and SOD (1.95 U.mg⁻¹ protein) activities were recorded in plants treated with 0.25 mM MeJA alone. These enzymes are critical for scavenging reactive oxygen species (ROS), which accumulate under elicitor-induced stress. The upregulation of these defense mechanisms not only protects cellular integrity but also stimulates the biosynthesis of secondary metabolites. A key finding was the significant increase in phenylalanine ammonia-lyase activity, a rate-limiting enzyme in the phenylpropanoid pathway. The highest PAL activity was observed in plants treated with 1 mM SA alone or in combination with 0.25 mM MeJA, correlating with elevated levels of total phenolics and flavonoids. Phenolic compounds, such as rosmarinic acid, are major bioactive constituents in sage, contributing to its antioxidant and antimicrobial properties. The increase in flavonoid content, particularly under the combination of 0.5–1 mM SA and 0.25 mM MeJA, further supports the role of these elicitors in activating secondary metabolic pathways. One of the most notable outcomes was the 39% increase in essential oil content under the 0.5 mM SA + 0.25 mM MeJA treatment. Essential oils in sage are synthesized via the terpenoid pathway, which appears to be strongly induced by these elicitors. The enhanced essential oil yield was accompanied by a significant improvement in antioxidant capacity, as evidenced by the DPPH radical scavenging assay. This suggests that the elicited plants not only produced higher quantities of bioactive compounds but also exhibited stronger free-radical quenching activity, which is valuable for medicinal and nutraceutical applications. These findings align with previous studies indicating that SA and MeJA act synergistically at optimal concentrations to enhance secondary metabolite production while maintaining plant growth. However, the negative effects of high MeJA levels (0.5 mM) underscore the importance of dosage optimization, as excessive elicitation can lead to phytotoxicity and metabolic imbalance. Conclusion This study demonstrated that the combined application of salicylic acid and methyl jasmonate in a hydroponic growth medium serves as a powerful tool for regulating growth and enhancing the production of secondary metabolites in sage plants (S. officinalis). A key finding was the identification of an optimal treatment combination (0.5-1 mM salicylic acid coupled with 0.25 mM methyl jasmonate), which synergistically increased biomass, essential oil content, and antioxidant activity. In contrast, higher concentrations of methyl jasmonate alone were found to inhibit growth. The implications of this research are significant, as it shows that by precisely modulating elicitor concentrations, the metabolic balance between growth and defense compound synthesis can be strategically managed to meet agricultural and pharmaceutical objectives. This approach holds considerable potential for the large-scale production and standardization of high-quality medicinal plants in controlled cultivation systems. Future research should focus on elucidating the molecular mechanisms underlying these synergistic effects, as well as evaluating the efficacy of these treatments in other plant species.
Medium Optimization for Callogenesis, Shoot Regeneration and Rooting of Hypericum perforatum from Shoot and Leaf Explants
Volume 40, Issue 3, Summer 2026, Pages 547-537
https://doi.org/10.22067/jhs.2021.60331.0
N. Afsharzadeh, M. Azizi, L. Samiei
Abstract Introduction Hypericum perforatum is a perennial plant that has been used in traditional medicine. H. perforatum have several types of medicinal compounds including antiviral compounds, antioxidants, flavonoids and also has valuable compounds such as Hypericin, Hyperforin, Pseudo-hypericin and xanthones that have effect on human physiology. Aerial parts of H. perforatum are dotted with dark glands that appear as black nodules. Black glands were known as localization of secondary metabolites. As a consequence of the commercial potential of this species attempts have been at plant improvement by application of in vitro culture methods. Among seedling explants of H. perforatum, it appears that roots are superior for shoot regeneration. It is generally accepted that explants source is an important factor r successful establishment of tissue culture in many cases. Production of secondary metabolites via plant cell and tissue culture yields various advantages, including standardization and quality. These criteria are also valid for the main economically important chemical in st. John’s wort, namely hypericin, pseudo hypericin and hyperforin. The aim of this study was to evaluate the effect of some tissue cultures on plant callogenesis, regeneration and also, study the effect of cytokinin and auxin on rooting rate and shoot multiplication. Materials and Methods This research included two experiments; first experiment was a completely randomized design in the form of factorial research. Second experiment was completely randomized design. First part of experiment: this part was conducted with two explants type, leaf and shoot which, maintained in light and dark condition. Shoot explants were derived from sterile seedlings that was obtained from seeds which were cultured on MS medium. Seeds were decontaminated by NaClO 20% (V/V) for 20 min and were washed with sterile deionized water. Leaf explants were derived from seedlings in the in vivo condition and decontaminated by NaClO 20% (V/V) for 20 min then washed with sterile deionized water. Both of the explants cultured on MS medium supplemented with BA (3 and 4 mg.l-1) and 2,4-D (0, 1 and 2.5 mg.l-1). Callogenesis and regeneration were measured after 4 weeks. Second part of experiment: shoot of indirect regeneration for rooting study, were cultured on ½ MS medium supplemented with BA (0 and 0.5 mg.l-1) and IBA (0 and 1 mg.l-1). Proliferation, shoot and root length were measured after 4 and 8 weeks. Results and Discussion Effects of the factors on first part of experiment; calluses of shoot and leaf explants were induced after 4 weeks. Shoot explants in medium supplemented with 4 mg.l-1 BA and 2.5 mg.l-1 2, 4-D showed 95% callogenesis. Leaf explants in medium supplemented with 3 mg.l-1 BA and 2.5 mg.l-1 2, 4-D showed 98% callogenesis. Shoot explants in medium supplemented with BA (3 mg.l-1) showed 62% regeneration and leaf explants in medium supplemented with BA (4 mg.l-1) showed 8% regeneration. For second part of experiments; root induction on half strength medium without hormone and medium supplemented with 0.5 mg.l-1 BA and 1 mg.l-1 IBA had the highest rooting frequencies. Average of root length was registered as 5.25 cm. half strength medium supplemented with 0.5 mg.l-1 BA had 100% and also, medium with 0.5 mg.l-1 BA and 1 mg.l-1 IBA had 86% shoot multiplication and were not appeared any roots. Average shoot length on medium without hormone and medium supplemented with 0.5 mg.l-1 BA and 1 mg.l-1 IBA was registered as 6.24 cm and in media with 0.5 mg.l-1 BA and 1 mg.l-1 IBA was registered as 1.8 cm. Based on the result of this experiments, the concentration levels of the two hormones BA and 2, 4-D in the induction of calli formation and regeneration of the H. perforatum have been effective. In the second experiment, hormone BA, in the absence of IBA did not cause rooting and increased the degree of shoots and ultimately proliferation was effective. Also, in treatment with 0.5 mg.l-1 BA and 1 mg.l-1 IBA, although the concentration of cytokinin was less than auxin, rooting was not done. Conclusion The goal of this study was to introduce the suitable medium for callogenesis and regeneration of H. perforatum for production and breeding aims. Tissue and cell culture methods are used for various purposes. The result of each section can be used effectively in research topics, including corrective tests, processes for increasing secondary metabolites, as well as increasing commercial products. Therefore, by introducing efficient and effective methods, it is possible to increase the production of plants by micropropagation in less time.
Utilization Effect of Superabsorbent Nano-Polymer, Grow-More, Iron and Zinc Fertilizers on the Functional Quality and Quantity of Agave (Agave americana cv. Marginata) under Drought Stress
Volume 40, Issue 2, Spring 2026, Pages 203-183
https://doi.org/10.22067/jhs.2024.90365.1384
M. Yadegari
Abstract Introduction Agave americana cv. Marginata from the Agavaceae family is an important plant with many uses in various medicinal and food industries. Among environmental stresses, water deficit stress plays an important role in the biosynthesis of secondary metabolites in medicinal plants in arid and semi-arid regions like Iran. Drought stress has detrimental effects on growth and yield and can disrupt the balance between the antioxidant defense system and free radicals by triggering a cascade of biochemical reactions in which free radicals cause cell damage. In sustainable production systems of medicinal and aromatic plants, stable quantitative and qualitative functions can be achieved under conditions of environmental stress and it is possible to improve the production of secondary metabolites in these plants under adverse environmental conditions. Therefore, this study was done to evaluate some of the important macro-micro nutrients on the morpho-physiological and phytochemical properties of Agave americana cv. Marginata to determine and introduce the best combinations of fertilizers with use of superabsorbent nano-polymer under water stress conditions. Materials and Methods This research used a randomized complete block design (RCBD) in a split-split plot layout with three replications. Irrigation regimes (D1-D3: Field Capacity, 50% and 75% evaporation from basin class A) in main plots, superabsorbent nano-polymer application (S1-S2: use and not use) in sub plots and treatments of fertilizers [F1-F15: grow-more 1 (F1), grow-more 2 (F2), grow-more 3 (F3), iron chelate (F4), zinc chelate (F5), grow-more 1 + iron chelate (F6), grow-more 1 + zinc chelate (F7), grow-more 2 + iron chelate (F8), grow-more 2 + zinc chelate (F9), grow-more 3 + iron chelate (F10), grow-more 3 + zinc chelate (F11), grow-more 1 + iron chelate + zinc chelate (F12), grow-more 2 + iron chelate + zinc chelate (F13), grow-more 3 + iron chelate + zinc chelate (F14) and control (F15)] in sub-sub plots were done. This research was performed in greenhouse conditions of Islamic Azad University Branch of Shahrekord (latitude: 32°20′ N, longitude: 50°51′ E, altitude: 2061 m) in 2023-2024. In each year, fertilizer treatments were applied in foliar application after stage of V8 (plants had 8 leaves) in 6 stage by 14 days interval and harvesting was done one month after the final application of fertilizers. The fertilizers Grow-More (NPK), iron and zinc in 4 gr.l-1 concentration by the production company certification were used in V8 stage in plants and the effects were compared with control plants. Weed control was done manually during the entire experiment. During the experiment, no systemic pesticide or herbicide was used. The harvested shoots were transferred to the laboratory for measurement of various characteristics. Morphological characters such as leaf length, leaf diameter and dry/fresh root/leaf weight; physiological characters such as total chlorophyll and zinc, iron and nitrogen content in root/leaf and phytochemical characters such as contents of hecogenin, saponin, and protein in leaf and root were measured. For assessment of the total chlorophyll content of A.americana, the leaves were extracted with 80% acetone. The absorbance of the extraction was read at 470, 648, and 664 nm, and the content of total chlorophyll was calculated as mg per g leaf fresh weight. For the measurement of hecogenin, saponin, total protein in the leaf and root and the nitrogen content in leaf and root use the protocols of Hackman et al., 2006, Sidana et al., 2016, Bradford, 1976; Álvarez-Chávez et al., 2021; were followed respectively. Results and Discussion Over two consecutive years, the obtained results showed that the use of treatments increased the characters and showed significant effectiveness. The highest mean values for leaf dry weight (30.11 g.plant-1), leaf fresh weight (207.33 g.plant-1), root dry weight (3.82 g.plant-1), root fresh weight (18.79 g.plant-1), length of leaf (64.55 cm), leaf diameter (0.41 Cm), total chlorophyll (2.82 mg.g-1 fresh weight), hecogenin (35.48 mg.kg-1 fresh weight), saponin (66164.8 mg.kg-1 fresh weight), nitrogen of leaf (1.39 mg.g-1 dry weight), nitrogen of root (1.23 mg.g-1 dry weight), protein of leaf (25.34 mg.g-1 dry weight), protein of root (16.99 mg.g-1 dry weight), zinc of leaf (68.99 µg.g-1 dry weight), zinc of root (44.84 µg.g-1 dry weight), iron of leaf (81.01 µg.g-1 dry weight) and iron of root (49.84 µg.g-1 dry weight) made in grow-more fertilizers specially grow-more 1 (20-20-20) in combination with Fe/Zn Libfer. However the superabsorbent nano-polymer application had an aggressive effect on the amounts of characters especially in hardness of water stress. The lowest values for morpho-physiological and phytochemical characters such as leaf dry weight (12.81 g.plant-1), leaf fresh weight (89.54 g.plant-1), root dry weight (1.62 g.plant-1), root fresh weight (8.18 g.plant-1), length of leaf (41.12 cm), leaf diameter (0.24 cm), total chlorophyll (1.95 mg.g-1 fresh weight), hecogenin (21.88 mg.kg-1 fresh weight), saponin (22134.3 mg.kg-1 fresh weight), nitrogen of leaf (0.29 mg.g-1 dry weight), nitrogen of root (0.77 mg.g-1 dry weight), protein of leaf (10.11 mg.g-1 dry weight), protein of root (6.47 mg.g-1 dry weight), zinc of leaf (34.34 µg.g-1 dry weight), zinc of root (20.36 µg.g-1 dry weight), iron of leaf (43.77 µg.g-1 dry weight) and iron of root (27.73 µg.g-1 dry weight) made in control plants. In most of the measured characters the treatments of D1S1F12, D3S1F14 and D2S1F14 were the best and control plants had the least of the characters. Conclusion Generally the application of Grow-More fertilizer 1 (20-20-20) with the consumption of zinc and iron fertilizers can be a good strategy to improve the morpho-physiological and phytochemical characters of Agave americana cv. Marginata especially the hecogenin and saponin amounts in water stress conditions. However the use of superabsorbent nano-polymer in strenuous drought stress (75%) is more effective than other water stress levels.
Morphophysiological and Phytochemical Responses of Basil (Ocimum basilicum) to Light Spectra and Foliar Ascorbic Acid Application
Volume 40, Issue 2, Spring 2026, Pages 280-263
https://doi.org/10.22067/jhs.2025.93634.1431
S. Tafakhori, V. Akbarpour, M. K. Souri
Abstract Introduction Basil (Ocimum basilicum L.), a warm-season herbaceous plant from the Lamiaceae family, is a valuable medicinal and culinary herb widely used in pharmaceutical, cosmetic, and food industries. Its aromatic leaves and mucilaginous seeds, beneficial for soothing sore throats, make it a significant crop in West Asia and the Middle East. As global populations grow, greenhouse and urban farming, such as vertical farming systems, have gained prominence to ensure year-round production (Massa, 2006). However, basil’s growth and productivity are often limited during low-light conditions, particularly in colder seasons. To address this, artificial lighting, particularly light-emitting diodes (LEDs), has emerged as a powerful tool due to their ability to deliver specific wavelengths, high photoelectric conversion efficiency, and optimal photosynthetically active radiation (PAR) efficiency (80–100%) (Darko et al., 2014). LEDs allow precise control over light quality and intensity, enhancing plant biomass and secondary metabolite production. Additionally, ascorbic acid, a potent antioxidant, plays a critical role in detoxifying reactive oxygen species (ROS) and improving plant growth under stress conditions (Shigeoka et al., 2002). Previous studies have shown that specific light spectra, particularly red and blue combinations, enhance terpenoid and phenolic content in basil (Rihan et al., 2020; Rafiei et al., 2023). Similarly, foliar application of ascorbic acid has been reported to improve growth and mitigate environmental stresses in various plants (Yadollahi et al., 2016; Esmailpour et al., 2023). This study investigates the combined effects of LED light spectra and ascorbic acid foliar application on the morphophysiological and phytochemical traits of basil under controlled conditions, aiming to optimize its production in low-light environments. Materials and Methods The experiment was conducted in the summer of 2024 at the Horticulture Laboratory of the University of Agricultural Sciences and Natural Resources, Sari, Iran. A split-plot design based on a randomized complete block with three replications was employed. The main factor consisted of four LED light treatments: three blue-to-red ratios (75:25 [BBBR], 50:50 [BBRR], 25:75 [BRRR]) and full-spectrum white light (FFFF). Red light was set at 660 nm, and blue light at 440 nm, with a photoperiod of 16 hours light and 8 hours darkness daily. The sub-factor included two levels of ascorbic acid foliar application (0.5 g.L-1 weekly and no application). Basil seeds were sown in plastic pots filled with a 1:1 mixture of perlite and cocopeat and fertilized using Hoagland’s solution via fertigation. Morphophysiological traits, including stem diameter, number of lateral branches, leaf count, fresh and dry shoot weight, root fresh and dry weight, and root volume, were measured. Phytochemical traits, such as antioxidant activity (DPPH method, measured at 517 nm), total phenolic content (Folin-Ciocalteu method, measured at 765 nm), and flavonoid content (aluminum chloride method, measured at 415 nm), were assessed using a spectrophotometer (UV-1800PC, Shimadzu, Japan). Data were analyzed using analysis of variance (ANOVA), and means were compared using appropriate statistical tests. Results and Discussion The results demonstrated that the red-blue (75:25) light treatment significantly enhanced several morphophysiological traits compared to full-spectrum light, increasing stem diameter by 8%, lateral branches by 26%, leaf count by 15%, fresh leaf weight by 39%, and dry shoot weight by 25%. Foliar application of ascorbic acid further amplified these traits, with increases of 23%, 21%, 20%, 44%, and 31%, respectively. The combination of red-blue (75:25) light and ascorbic acid resulted in the highest stem height, root dry weight, and root volume, indicating a synergistic effect. These findings align with previous research showing that red light promotes stem elongation and biomass accumulation through gibberellin synthesis, while blue light regulates cellular expansion via cryptochromes (Hosseini et al., 2019; Kaiser et al., 2019). Ascorbic acid likely enhanced growth by acting as a coenzyme in photosynthesis and hormone biosynthesis, increasing carbohydrate production and nutrient uptake (Barkosky and Einhellig, 2003). For phytochemical traits, the red-blue (50:50) light without ascorbic acid yielded the highest antioxidant activity, suggesting that balanced light spectra stimulate defense mechanisms. The red-blue (75:25) light increased phenolic content by 12% and flavonoid content by 28% compared to full-spectrum light, consistent with studies showing that blue light enhances phenylpropanoid biosynthesis via phenylalanine ammonia-lyase (PAL) activation (Rafiei et al., 2023). However, ascorbic acid did not significantly increase flavonoid content, possibly due to metabolic saturation or suppression of defense responses at high antioxidant levels (Azoz et al., 2016). These results highlight the importance of tailored light spectra and nutritional interventions for optimizing basil’s growth and secondary metabolite production. Conclusion This study confirms that LED light spectra, particularly the red-blue (75:25) combination, significantly improve basil’s morphophysiological traits, including stem diameter, leaf count, and biomass, under low-light conditions. Foliar application of ascorbic acid enhances these effects, promoting root development and overall plant growth. While specific light spectra alone can boost antioxidant activity and phenolic content, ascorbic acid’s influence is more pronounced on growth than on flavonoid accumulation. These findings provide a practical framework for optimizing basil production in controlled environments, such as greenhouses and vertical farms, by integrating light quality management with ascorbic acid supplementation. This approach offers a cost-effective strategy to enhance both the quantity and quality of basil, supporting sustainable agricultural practices.
Investigating the Effect of Humic Acid and Potassium Silicate Fertilizers on Growth Indicators, Yield and Essential Oil of Cumin (Cuminum cyminum L.)
Volume 40, Issue 2, Spring 2026, Pages 296-281
https://doi.org/10.22067/jhs.2025.93814.1433
M. H. Aminifard, L. Asdollaei, H. Bayat
Abstract Introduction Cumin (Cuminum cyminum L.) is one of the most important domestic herbs in Iran and is one of the earliest spices used by humans. Due to its characteristics such as short growing season, low water requirement, non-interruption of growth season with other agricultural products as well as high economic justification for other crops and export, it has found a special place in arid and semi-arid areas. Organic and chemical fertilizers are necessary for each other and both types of fertilizers are needed to create favorable conditions to improve quantitative and qualitative traits. Overuse of chemical fertilizers has caused several problems in agriculture including changes in the soil structure, contamination of underground waters, and heavy metal toxicity. Agricultural scientists suggest replacing chemical fertilizers with organic products to reduce negative effects on the environment and soil properties. In recent years, neglecting the importance of organic matters to improve soil fertility has led to an increase in chemical fertilizer use in Iran. Organic matter, due to its positive effects on soil, is identified as one of the important pillars of soil productivity. However, more than 60 percent of agricultural soils in Iran contain less than one percent of organic matter. Therefore, the objective of this study was to investigate the influence of humic acid and potassium silicate on morphology parameters and the essential oil yield of cumin. Materials and Methods In order to investigate the effect of humic acid and potassium silicate on the growth and yield of Birjand cumin, a factorial experiment was conducted in a randomized complete block design with replication in the research field of the Faculty of Agriculture, Birjand University in 2023. The first factor included humic acid at three levels (0, 5, and 10 kg.ha-1) and the second factor was potassium silicate at three levels (0, 2, and 4 per thousand). Humic acid fertilizer was applied with irrigation water at the three-leaf stage, tillering and after fruit formation of cumin. Potassium silicate fertilizer was applied as a foliar spray at the three-leaf stage, tillering and after fruit formation of cumin. After the crop ripened, the plant height, number of lateral shoots per plant, number of umbels per plant, number of umbels per umbel, number of seeds per umbel, 1000-seed weight, seed yield, percentage and yield of essential oil were measured. Results and Discussion The results of variance analysis showed that the use of potassium silicate and humic acid had a significant effect on the vegetative (plant height, number of lateral shoots), reproductive (number of umbels per plant, number of umbels per umbel, number of seeds per umbel, 1000 weight seed and seed yield) and essential oil characteristics of cumin, such that the highest plant height (15.27 cm) and the number of lateral shoots (3.77) were obtained from the use of 2 per thousand potassium silicate and the highest fresh and dry plant weight was obtained from the use of 4 per thousand potassium silicate. The results of the interaction of treatments showed that the highest 1000-seed weight, seed yield and essential oil yield were obtained from the use of 4 per thousand potassium silicate and 10 kg.ha-1 humic acid, and the highest plant height, number of umbels and number of seeds per umbel were obtained from the use of 2 per thousand potassium silicate and 5 kg.ha-1 humic acid. Conclusion In general, the results indicated a positive effect of potassium silicate and humic acid on cumin yield and yield components. Therefore, according to the findings of this study, it seems that simultaneous use of potassium silicate (4 per thousand) and humic acid (10 kg.ha-1) can be used to improve the seed yield and essential oil of cumin.
Optimizing the in vitro Culture for Callus Induction of Iranian St John's Wort (Hypericum perforatum L.)
Volume 40, Issue 1, Winter 2026, Pages 30-19
https://doi.org/10.22067/jhs.2021.59629.0
M. Abdollahpoor, M. Azizi, S. Kalantari, Y. A. Saadat
Abstract Introduction Hypericum perforatum L. is an important medicinal plant that used for depression treatment. In vitro regeneration has been successfully achieved for many Hypericum species from a range of explants sources with different growth regulators. Recent studies have demonstrated that in vitro culture is an option for multiplication of different Hypericum species. With consideration this notice that tissue culture can provide an affordable alternative method for propagation with high speed to production of intensive plant material as well as suitable materials for breeding programs of H. perforatum, the objective of this study was to investigate the effects of explant types (leaf and stem), plant growth regulators (2,4-Dichlorophenoxyacetic acid (2,4-D), Naphthalene Acetic Acid (NAA), Benzyl Adenine (BA) and Kinetin (Kin)), light (dark and weak light), media culture (MS medium and MS medium with B5 vitamins) and poly vinyl pyrrolidone (PVP) on callus induction in H. perforatum at in vitro culture condition. Materials and Methods For preparation of sterile plantlets, the seeds of Iranian H. perforatum (Azadshahr population) were cultured in 1.2 MS growth regulator free-media. For investigation the callus induction of Iranian H. perforatum the leaf and stem explants of in vitro obtained plantlets were used. Explants were cultured in different concentrations of 2,4-D (0.2, 0.5 and 1 mg.l-1) with two kinds of cytokines BA and Kin (0.2, 0.5 and 1 mg.l-1) as well as 1 mg.l-1 NAA. For browning control of calli the effects of light (dark and weak light), media culture (MS medium and MS medium with B5 vitamins) and four concentrations of poly vinyl pyrrolidone (0, 50, 100 and 200 mg.l-1) were also surveyed. Results and Discussion Callus cultures could be used for cell suspension initiation, studying of their morphogenetic potential and screening of secondary metabolite profile. In present study the response of two H. perforatum explants (leaf and stem) to different levels and combinations of auxins and cytokinins were tested. The callus induction in both studied explants (leaf and stem) was just observed in supplemented media with plant growth regulators. The calli of leaf explants were showed better growth in dark and the highest callus fresh weight was obtained in 0.25 mg.l-1 2,4-D + 1 mg.l-1 Kin and 0.5 mg.l-1 2.4-D + 1 mg.l-1 BA. of the various concentrations and combination of growth regulators, the minimum response about callus induction was observed in the presence of 1 mg.l-1 2,4-D in combination with 1 mg.l-1 NAA. The obtained calli got browning shortly after induction. The investigation of light effect on callus quantity and quality showed that not only light did not affect the callus induction and callus browning but also reduced the callus growth. The highest callus fresh weight was obtained in 100 mg.l-1 poly vinyl pyrrolidone in leaf explant. Few species within the genus Hypericum have been used to produce callus. In H. perforatum seedling, different explants such as shoot apical meristem, stem segments and leaves were used for callus induction. In H. erectum callus induction was obtained by culturing seedlings in the presence of Indole Acetic Acid (IAA) and BA under darkness. The combination of cytokinins and auxins did not support callus growth of H. brasiliense and callus of nodal explants was only obtained in the presence of 2,4-D or NAA using either MS or B5 medium. These differences among literatures can be due to different cultivars, culture conditions, explant type and medium composition. Conclusion The plant growth regulators is necessary for callus induction in Iranian H. perforatum and leaf is suitable for this purpose. The light intensity and poly vinyl pyrrolidone did not control the browning of of H. perforatum calli.
Effect of Putrescine Foliar Application on Growth and Physiological Characteristics of Echium amoenum Seedlings Under Salinity Conditions
Volume 40, Issue 1, Winter 2026, Pages 60-45
https://doi.org/10.22067/jhs.2025.91889.1413
B. Rahimkhani, M. Naseri, A. Ahmadian, M. Alipanah
Abstract Introduction Polyamines are a group of low molecular weight organic compounds with two or more amine groups that are present in almost all living organisms. Polyamines are organic compounds that play a crucial role in various physiological processes in plants, particularly in response to stress. Research has demonstrated that these compounds-primarily putrescine, spermidine, and spermine-are involved in cellular functions such as growth regulation, cell division, and differentiation. Their role in stress responses is complex and varies significantly depending on the plant species and the specific type of stress encountered. The level of polyamines in plants increases under stress conditions, and this increase of polyamines from the plant against salinity by removing free radicals, stabilizing membrane and cell structure, creating cation and anion balance, regulating it protects ion channels. The foliar application of putrescine can significantly improve various physiological traits in plants subjected to salinity stress. By enhancing growth, photosynthetic efficiency, osmotic adjustment and oxidative stress tolerance, putrescine acts as a valuable tool for improving plant resilience under challenging environmental conditions. Echium amoenum is an annual plant of Boraginaceae family and is considered as one of the important medicinal plants in traditional medicine. Blue-violet petals of E. amoenum are used in Iranian traditional medicine as a painkiller, relaxant, invigorator, anti-inflammatory and pain reliever. To investigate the impact of putrescine on the morpho-physiological characteristics of Echium amoenum seedlings under salinity stress, a greenhouse experiment was conducted. Materials and Methods The experimental design was factorial, incorporating two factors: the application of putrescine and salinity stress induced by sodium chloride. This was organized as a completely randomized design. The first factor involved two levels of putrescine (0 and 1.5 mM), while the second factor included three levels of salinity stress (1600, 4000, and 8000 dS.m-1). Seeds were purchased from Pakaan Seed Company in Isfahan. Selecting high-quality seeds suitable for the growing conditions is crucial for successful plant growth. After soaking, the seeds were transferred to small pots containing a mixture of three parts peat moss and one part perlite. This mixture enhances aeration and moisture retention in the soil, creating an optimal environment for root development. One week after transplanting the seedlings to the main pots, a foliar application of putrescine was performed. Putrescine is a polyamine compound that can enhance plant growth and resilience against stress. This application was repeated every two weeks. One week after the first application of putrescine, salinity stress was introduced. To prevent shock to the plants, the salinity treatment was gradually applied in three stages. This gradual approach helps the plants acclimate to the new conditions. To prevent salt buildup in the soil, leaching with regular water was conducted every two weeks. Results and Discussion The results indicated that both the individual effects of salinity and putrescine, as well as their interaction, significantly influenced shoot fresh weight, root fresh weight, root length, and the overall dry weight of the Iranian borage plants. The application of putrescine enhanced the levels of proline and potassium in the leaves, which mitigated the detrimental effects of salinity stress on the Iranian borage plants. Furthermore, foliar spraying of putrescine increased chlorophyll content, thereby promoting photosynthesis and improving plant growth under saline conditions. Comparative analysis of the average data revealed that the highest dry weight of Iranian borage seedlings (0.6 g), relative leaf water content (85%), chlorophyll a (4 mg.g-1), and chlorophyll b (1.2 mg.g-1) were achieved with the combination of putrescine and salinity at 1.6 mm.m-1. The results underscore the potential of putrescine as a practical strategy for enhancing the growth and resilience of Iranian borage plants under salinity stress. By improving growth parameters such as shoot and root weights, root length, and overall dry weight, as well as enhancing physiological traits like proline and potassium levels, putrescine plays a crucial role in mitigating the adverse effects of salinity. Conclusion The foliar application of putrescine at 1.5 mM presents a valuable and practical strategy for managing salinity stress in Iranian borage seedling production. By enhancing photosynthetic pigments and antioxidant properties, putrescine helps the plant maintain its physiological functions and resilience under stress. This approach not only supports the growth and health of Iranian borage but also has implications for improving the quality and yield of its medicinal properties.
The Effect of Different Pretreatments on Seed Germination of the Medicinal Plant Artemisia herba-alba: A Strategy for the Revival of an Endangered Species
Volume 40, Issue 1, Winter 2026, Pages 76-61
https://doi.org/10.22067/jhs.2025.92128.1414
A. Azizi, , M. Mahmoodi Sourestani, H. Motamedi, M. Bagnazari
Abstract Introduction Artemisia herba-alba is a silvery perennial shrub whose essential oil contains 1, 8-cineole, chrysanthenone, chrysanthenol, thujone, and camphor. The therapeutic properties of the plant include antioxidant, antibacterial, antispasmodic, treatment of respiratory and digestive disorders, diabetes, disinfectant, vasodilator, insecticidal, anthelmintic, and nematicide. Nowadays, the wild population of this species has been severely reduced, and it is now considered as a rare and endangered plant. The cultivation or domestication of this medicinal species could be a promising alternative for its conservation and sustainable use. Physiological studies have proven that the seeds of A. herba-alba contain phytotoxic chemicals that prevent germination under adverse conditions. Materials and Methods To investigate the elimination of seed dormancy and enhance the germination of A. herba-alba seeds, different concentrations of potassium nitrate and gibberellic acid for two periods of time were studied. Moreover, the superior treatment was combined with light treatment at four levels. The first experiment was implemented as a factorial based on a completely randomized design with three replications in the laboratory of the Horticulture Department, Faculty of Agriculture, Shahid Chamran University, Ahvaz. The first factor included the gibberellic acid at three concentrations (250, 500, and 1000 mg.L-1) and potassium nitrate at three concentrations (50, 100, and 200 mM) which were applied separately. The second factor included the duration of priming at two periods (12 and 24 hours). Based on the results of the first experiment, the second experiment was conducted with the superior treatment in the first experiment (500 ppm gibberellic acid for 12 hours) along with dry and wet chilling treatments as the first factor in combination with light treatment at four levels (0, 8, 16, and 24 h) as the second factor. At the end of the experiments, the length of the root, shoot, seedling height, fresh and dry weight, seed longitudinal and weight vigor index, germination percentage and rate, and alpha-amylase enzyme activity were measured. Statistical analysis of the measured traits was performed using SAS version 9.4 statistical software (SAS Institute Inc., Cary, NC, USA). The LSD test (P=0.05) was used to compare the means. Also, principal component analysis (PCA) and heat map correlation (HMC) were performed to identify the relationships between traits and the dispersion of treatments using the R studio v1.3.959 package. Results and Discussion The results showed that the gibberellic acid and potassium nitrate treatments had a significant effect on the studied traits at all levels, while the impact of priming duration treatment was not significant. Based on the findings of the first experiment, the highest shoot length (13 mm), root length (12 mm), seedling length (25 mm), fresh weight (0.0110 g), seedling dry weight (0.0022 g), longitudinal vigor index (1806.3), weight vigor index (0.1604), germination percentage (71 %), germination rate (8.1 seed.day-1), and alpha-amylase enzyme activity (0.0676 mg.g-1 FW.min-1) were recorded in the 500 mg/L gibberellic acid treatment. The results of the second experiment showed that the combined treatment of 16 hours of light with the gibberellic acid was able to increase the longitudinal and weight vigor index of the seedling, percentage, speed, and activity of the alpha-amylase enzyme by 240.13 %, 221.2 %, 358.82 %, 356.8 %, and 60.78 % compared to the control, respectively. The combined treatment of 16 hours of light with the gibberellic acid had the greatest effect on the dormancy breaking of A. herba-alba seeds (78 % germination). The results of the heat map correlation (HMC) showed that there was a positive correlation between the traits of seedling height, root and shoot length, seedling fresh and dry weight, longitudinal and weight vigor index, speed, and percentage germination. Also, the alpha-amylase enzyme was positively correlated with the longitudinal and weight vigor index, speed, and germination percentage and negatively correlated with seedling height, root and shoot length, and seedling fresh and dry weight. In the first experiment, principal component analysis showed that the combination of the first two components explained 86.35 % of the variations, which accordingly included 78.53 % of the first component and 7.82 % of the second component. Based on this analysis, seedling height, root, and shoot length, longitudinal and weight vigor index, speed, germination percentage, and alpha-amylase enzyme, which were the highest of these traits recorded in the treatments of gibberellic acid hormone and potassium nitrate, played a role in the loading of the first component. Also, in the second experiment, it was determined that the combination of the first three components explained 92.73 % of the variations, which included 56.17 % of the first component, 28.85 % of the second component, and 7.71 % of the third component. Based on this analysis, seedling height, root and shoot length, longitudinal and weight vigor index, and germination rate, which were the highest in the light treatment, played a role in the loading of the first component. Germination percentage and alpha-amylase enzyme, which were the highest in the combined light treatment with gibberellic acid, played a crucial role in the loading of the second component. Conclusion In this study, the results showed that A. herba-alba seeds are photoblastic positive, and since gibberellic acid is generally effective in breaking dormancy caused by metabolic barriers, it can be said that metabolic barriers mainly cause dormancy in the seeds. Therefore, in the light treatment (16 hours) and combination with gibberellic acid (500 mg.L-1), the highest values of the longitudinal and weight vigor index traits of the seedling, the percentage and speed of germination, and the activity of the alpha-amylase enzyme were recorded. In the same treatment, germination increased nine days after the treatment, and the germination percentage increased from 20 % in untreated seeds to 78 % in primed seeds. Also, in the treatment of the gibberellic acid (500 mg.L-1) alone, the highest shoot length, root length, seedling height, and fresh and dry weight were recorded. Therefore, light treatment (16 hours) combined with gibberellic acid (500 mg.L-1) was introduced as the most effective strategy to increase seed germination of A. herba-alba and thus help save this species from extinction. The present study showed that the use of combined light treatment with gibberellic acid is a very effective and low-cost strategy to break seed dormancy and germinate A. herba-alba medicinal plant.
The Effect of Seaweed Extract and Sucrose Foliar Application on Some Growth, Physiological, and Phytochemical Indices of Basil (Ocimum basilicum)
Volume 40, Issue 1, Winter 2026, Pages 91-77
https://doi.org/10.22067/jhs.2025.92476.1418
A. Khoshnoudi Abroudi, V. Akbarpour, M. A. Bahmanyar, M. Ashnavar
Abstract Basil (Ocimum basilicum L.) is an annual plant from the mint family that grows in tropical and subtropical regions. Due to its distinctive aroma and flavor, it is used both fresh and as a spice and medicinal herb. Basil contains essential oils with antifungal, antibacterial, and insect-repellent properties, which are utilized in the food, cosmetic, and pharmaceutical industries. Phenylpropanoids are among the main compounds in its essential oil. Seaweeds have emerged as a novel source for producing organic fertilizers. These aquatic organisms contain valuable compounds such as plant hormones, trace elements, vitamins, and amino acids, which are beneficial for plant growth. Carbohydrates play a vital role in plant physiology. Sucrose, the primary form of carbohydrates produced during photosynthesis, is crucial for energy transport and regulating plant growth. At high concentrations, these compounds act as protective agents, while at lower concentrations, they serve as signaling molecules in response to environmental stresses. Sucrose plays a regulatory role in various stages of plant growth, from germination to senescence. Therefore, this research aimed to investigate the effects of different levels of seaweed and sucrose on the morphophysiological and phytochemical characteristics of basil. Materials and Methods This study aimed to investigate the effects of seaweed extract fertilizer and sucrose on the morphophysiological and phytochemical characteristics of basil. The experiment was conducted as a factorial arrangement in a randomized complete block design with three replications in a greenhouse in Neyshabur during the 2022 growing season. The first factor included different levels of seaweed fertilizer (0, 1, 2, and 3 Ml.L-1(A0, A1, A2 & A3)), and the second factor consisted of sucrose levels (0, 2.5, 5, and 7.5 g.L-1(S0, S2.5, S5 & S7.5)), applied as foliar sprays every 10 days. Plant moisture was maintained through drip irrigation. At the end of the vegetative growth stage, morphophysiological traits (plant height, stem diameter, fresh and dry weight, leaf area) and phytochemical properties (photosynthetic pigments, anthocyanin, antioxidant activity, total phenols, and flavonoids) were measured. Data were analyzed using SAS version 9, and means were compared using Duncan's test. Results and Discussion The interaction effect of seaweed and sucrose foliar application on plant height, fresh and dry leaf weight, fresh stem weight, leaf area, chlorophyll a, b, and total, carotenoid, anthocyanin, antioxidant activity percentage, total phenol, and flavonoids was significant at the 1% probability level. The application of A1S7.5 as a foliar spray on the medicinal plant basil resulted in the highest plant height (43.83 cm), fresh weight (5.34 g), dry weight of aerial parts (0.65 g), and antioxidant activity percentage (64.46%). Using A2S7.5, the highest levels of chlorophyll a (0.865 mg.g-1 fresh weight), chlorophyll b (0.636 mg.g-1 fresh weight), and total chlorophyll (1.052 mg.g-1 fresh weight) were obtained. Additionally, the highest leaf area (9.65 cm²) was observed with the A2S2.5 treatment, carotenoid (0.636 mg.g-1 fresh weight) with A3S0, anthocyanin (10.28 mg.g-1 dry weight) with A3S2.5, and total phenol (1.60 mg gallic acid.g-1 dry weight) and flavonoids (1.32 mg quercetin.g-1 dry weight) were achieved with the A2S7.5 treatment. These findings demonstrate that seaweed-sucrose foliar sprays can effectively enhance basil's agronomic and phytochemical traits, offering a sustainable alternative to synthetic fertilizers in medicinal plant production. The significant improvement in both yield and bioactive compounds underscores the dual benefit of this approach for commercial cultivation. Furthermore, this eco-friendly technique could be particularly valuable for organic farming systems and in regions where synthetic fertilizers are either expensive or environmentally restricted. The optimized treatments provide actionable insights for farmers and researchers aiming to improve both yield and bioactive compound quality in basil cultivation. Conclusion Overall, the combined treatments A1S7.5 and A2S2.5 had the most significant impact on morphophysiological traits. Photosynthetic pigments were influenced by the combinations A2S7.5 and A3S0. Additionally, the phytochemical characteristics of basil were affected by the treatments A1S7.5, A2S7.5, and A3S2.5. This study demonstrates that seaweed-sucrose combinations can simultaneously enhance plant growth (by improving morphophysiological traits) and medicinal quality of basil (by boosting phytochemical content). This sustainable agriculture approach serves as an effective alternative to chemical fertilizers, improving both crop yield and bioactive compound content.
Investigating Quantitative and Qualitative Traits of fennel (Foeniculum vulgare Mill) under the Effect of Different Growth Stages and Levels of Foliar Spraying with Potassium Nanoparticles
Volume 40, Issue 1, Winter 2026, Pages 128-111
https://doi.org/10.22067/jhs.2025.92581.1420
N. Gharehbaghli, A. Mehraban
Abstract Introduction Fennel (Foeniculum vulgare), a valuable medicinal plant belonging to the Apiaceae family, has been widely recognized for its medicinal and culinary uses. Its essential oils and bioactive compounds, such as anethole, fenchone, and estragole, have made it a significant crop in the pharmaceutical, food, and cosmetic industries. Fennel is not only prized for its aromatic seeds and leaves but also for its therapeutic properties, including anti-inflammatory, antimicrobial, and antioxidant effects. Given the increasing global demand for high-quality medicinal plants, optimizing cultivation practices to enhance growth, yield, and essential oil production is crucial. Traditional agricultural practices often face challenges such as nutrient inefficiency, environmental degradation, and resource depletion, which can limit the productivity and sustainability of medicinal plant cultivation. In this context, nanotechnology, particularly the use of nanofertilizers, has emerged as a promising approach to improve nutrient efficiency and plant performance. Nanofertilizers offer several advantages over conventional fertilizers, including enhanced nutrient uptake, reduced application rates, and minimized environmental impact. This study aimed to investigate the effects of foliar application timing and varying concentrations of potassium nanoparticles on the growth characteristics and essential oil yield of fennel over two cropping years (2021-2022 and 2022-2023). By exploring the potential of nanotechnology in fennel cultivation, this research seeks to contribute to the development of sustainable agricultural practices that can meet the growing demand for medicinal plants while preserving environmental health. Materials and Methods The experiment was conducted as a factorial design in a randomized complete block design with three replications. The factors included foliar application timing at three growth stages: stem formation, flowering, and fruiting; and nano potassium oxide concentrations at five levels: 0 (control), 2, 3, 4, and 5 parts per thousand (ppt). The measured parameters included plant height, biomass yield, seed yield, 1000-seed weight, number of umbels per plant, seed carbohydrate content, chlorophyll a, b, and total chlorophyll levels, as well as essential oil percentage and yield. Result and Discussion The results demonstrated that foliar application of potassium nanoparticles significantly influenced the growth and essential oil production of fennel. The application of 3 ppt potassium nanoparticles had the most pronounced positive effects on plant height, biomass yield, seed yield, 1000-seed weight, number of umbels per plant, seed carbohydrate content, and chlorophyll levels (a, b, and total). This concentration was found to optimize nutrient uptake and utilization, leading to enhanced photosynthetic efficiency and overall plant vigor. In terms of essential oil production, the highest essential oil percentage (4.37%) was observed in plants treated with 5 ppt potassium nanoparticles. However, the maximum essential oil yield (5.69 kg.ha-1) was achieved with 4 ppt potassium nanoparticles applied during the fruiting stage. This indicates that while higher concentrations of potassium nanoparticles may increase the essential oil percentage, the optimal concentration for maximizing essential oil yield is 4 ppt during the fruiting stage. The fruiting stage was identified as the most critical period for foliar application, as it coincides with the peak demand for nutrients to support seed and essential oil developmentThe findings of this study highlight the importance of precise nutrient management in fennel cultivation. Potassium, as a vital macronutrient, plays a key role in various physiological processes, including enzyme activation, osmoregulation, and stress tolerance. The use of potassium nanoparticles enhances nutrient use efficiency by providing a controlled and sustained release of potassium, thereby improving plant growth and essential oil production. Furthermore, the application of nanotechnology in agriculture offers an environmentally friendly alternative to conventional fertilizers, reducing the risk of groundwater contamination and soil salinity. From an agronomic perspective, the results suggest that foliar application of 4 ppt potassium nanoparticles during the fruiting stage is the most effective strategy for maximizing essential oil yield in fennel. This approach not only improves the economic viability of fennel cultivation but also aligns with sustainable agricultural practices by minimizing input waste and environmental impact. Conclusion In conclusion, this study underscores the potential of nanotechnology, particularly potassium nanoparticles, in enhancing the growth and essential oil production of fennel. By optimizing foliar application timing and concentration, farmers can achieve higher yields and better-quality essential oils, thereby increasing the profitability of fennel cultivation. The findings of this research provide valuable insights into the role of nanotechnology in sustainable agriculture and its potential to address global challenges in food and medicinal plant production. Future research should explore the long-term effects of nanofertilizers on soil health and plant physiology, as well as their applicability to other medicinal plants. Additionally, studies on the economic feasibility and scalability of nanofertilizer use in different agricultural systems would be beneficial. This work contributes to the growing body of knowledge on sustainable agricultural practices and highlights the importance of integrating innovative technologies into traditional farming systems to ensure food security and environmental sustainability in the face of a changing climate and growing population.
Eucalyptus (Eucalyptus spp) Essential Oil in Northern Iran: A Comparative Analysis of Chemical Composition with International Standards and Leading Global Producers
Volume 40, Issue 1, Winter 2026, Pages 144-129
https://doi.org/10.22067/jhs.2025.93102.1425
Z. Ziaei Movahhed, A. Yadollahi, L. Samiei, M. T. Ebadi, A. Mokhtassi-Bidgoli
Abstract Eucalyptus essential oils are among the most commercially important plant-derived oils due to their high content of bioactive terpenoid compounds, particularly 1,8-cineole and α-pinene, which are widely used in pharmaceutical, food, cosmetic, and hygienic products. In recent years, the increasing global demand for natural and plant-based ingredients has further enhanced the industrial significance of eucalyptus essential oils. Although various Eucalyptus species have been introduced and cultivated in different regions of Iran, comprehensive comparative information on the yield and chemical quality of locally produced oils, especially in relation to international standards, remains limited. Among the cultivated species, Eucalyptus globulus and Eucalyptus camaldulensis are of particular economic and industrial importance. Evaluating their essential oil characteristics under local climatic conditions is crucial for assessing their suitability for industrial applications and their potential competitiveness in global markets. Therefore, the present study aimed to analyze and compare the essential oil yield and chemical composition of E. globulus and E. camaldulensis cultivated in Northern Iran, with special emphasis on their conformity with ISO 770:2002 and ISO 3065:2011 standards and their potential industrial value. Materials and Methods Fresh leaves of E. globulus and E. camaldulensis were collected from mature trees grown in the Behshahr region of Mazandaran Province, Northern Iran, an area characterized by a humid temperate climate. To minimize the loss of volatile compounds, the leaves were shade-dried under controlled conditions at 24 °C and 40% relative humidity. Essential oils were extracted by hydrodistillation using a Clevenger-type apparatus for three hours, and oil yield was calculated on a dry weight basis. The chemical composition of the extracted essential oils was determined using gas chromatography (GC) and gas chromatography–mass spectrometry (GC–MS) equipped with a DB-5 capillary column. Compound identification was carried out by comparing mass spectra and retention indices with those reported in the Wiley7 and Adams spectral libraries. The resulting chemical profiles were evaluat
